Subwoofers & Boxes
Come to Dr Dashboard in Evansville, IN for the best subwoofers & boxes in the area.
SUBWOOFERS
KENWOOD
P-XW1221DHP
Dual 12" Preloaded High Power Subwoofer Enclosure
- Peak Power 2000W
- RMS Power 1000W
- PP Cone with Dual Area Cap
- Stress Controlled Spider
- 2Ω Impedance
- Closed Yoke with Advanced Airflow Control
- Multiple Position Options (Forward, Rear, or Down-Firing installation)
- Slant Back Design
- Steel Mesh Grilles Included
- 35-3/4"(W) x 15-13/16"(H) x 15-13/16"(D)
P-XW1221D
Dual 12" Preloaded Subwoofer Enclosure
- Peak Power 2000W
- RMS Power 600W
- PP Cone with Diamond Array Pattern
- Stress Controlled Spider
- 2Ω Impedance
- X-Motif Cap
- Closed Yoke with Advanced Airflow Control
- Multiple Position Options (Forward, Rear, or Down-Firing installation)
- Slant Back Design
- INCLUDED Steel Mesh Grilles
- 35-3/4"(W) x 15-13/16"(H) x 15-13/16"(D)
P-XW1241S
12" Preloaded Subwoofer Enclosure
- Peak Power 2000W
- RMS Power 300W
- PP Cone with Diamond Array Pattern
- Stress Controlled Spider
- 4Ω Impedance
- Steel Mesh Grille Included
P-XW1221SHP
12" Preloaded High Power Subwoofer Enclosure
- Peak Power 2000W
- RMS Power 500W
- PP Cone with Dual Area Cap
- Stress Controlled Spider
- 2Ω Impedance
- Steel Mesh Grille Included
Rockford Fosgate
Power 15" T1 2-Ohm DVC Subwoofer
The Power Series T1D215 Dual 2-Ohm subwoofer builds on innovative new Rockford Fosgate technologies. These bad boys have patented VAST technology that increases surface cone area up to 25%. The new FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech and ready to set off car alarms, the T1D215 is here!
Power 12" T1 2-Ohm DVC Subwoofer
The Power Series T1D212 Dual 2-Ohm subwoofer builds on innovative new Rockford Fosgate technologies. These bad boys have patented VAST technology that increases surface cone area up to 25% so the T1D212 performs like a much larger woofer over the previous model. The new FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech and ready to set off car alarms, the T1D212 is here!
Power 10" T1 2-Ohm DVC Subwoofer
The Power Series T1D210 Dual 2-Ohm subwoofer builds on innovative new Rockford Fosgate technologies. These bad boys have patented VAST technology that increases surface cone area up to 25% so the T1D210 performs like a much larger woofer over the previous model. The new FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech and ready to set off car alarms, the T1D210 is here!
Power 12" T0 4-Ohm DVC Subwoofer
The T0D412 12" 4-ohm Dual Voice Coil subwoofer mimics the performance and design from its older Power Series brothers. The T0 subwoofers feature VAST technology that increases surface cone area up to 25% so it performs like a much larger woofer. The FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech, and high power handling characteristics let this subwoofer wear the torture-tested "Power Series" badge!
12″ Punch P3 4-Ohm DVC Subwoofer
The P3D4-12 12-inch subwoofer is Rockford Fosgate's best performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dustcaps along with unique spider venting to keep the motor cooler than previous versions. These feature VAST technology to increase surface cone area up to 25% and a FlexFit basket for extreme installations. Best of all, a new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance.
BUY NOW!
10″ Punch P3 4-Ohm DVC Subwoofer
The P3D4-10 is Rockford Fosgate's best performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dustcaps along with unique spider venting to keep the motor cooler than previous versions. These feature VAST technology to increase surface cone area up to 25% and a FlexFit basket for extreme installations. Best of all, a new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance.
BUY NOW!
12″ Punch P2 4-Ohm DVC Subwoofer
Rockford Fosgate has always been known as "The PUNCH" and the P2 12" subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.
BUY NOW!
10″ Punch P2 4-Ohm DVC Subwoofer
Rockford Fosgate has always been known as "The PUNCH" and the P2 10" subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.
BUY NOW!
12″ Punch P1 4-Ohm SVC Subwoofer
Rockford Fosgate P1 12" are the first in a family of world famous subwoofers called "The Punch". During their inception in the 1980's, they quickly became "The Woofer of Choice" for fanatic car audio systems, with a continued tradition today. Kevlar fiber reinforced paper cones deliver bass impact you can feel, and our VAST technology in the Punch P1 woofer increases woofer surface cone area by up to 25%. Best in standard sealed and vented enclosures. Includes soft touch ABS tri trim ring.
BUY NOW!
JL Audio
W6 Class
12W6V3-D4
If you are seeking intensely powerful sub-bass that compromises nothing in terms of sound quality, the 12W6v3 is your ultimate ally. This highly advanced subwoofer driver offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.
BUY NOW!
10W6V3-D4
If you are seeking to reproduce the highest quality sub-bass in a very compact enclosure application, the 10W6v3 is the ultimate choice. This advanced subwoofer driver offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.
BUY NOW!
W3 Class
JL Audio 13W3V3-4
Product highlights:
BUY NOW!
- 13.5" 4-ohm subwoofer
- mineral-filled polypropylene cone with nitrile-butylene rubber surround
- power range: 150-600 watts RMS
- peak power handling: 1,200 watts
- frequency response: 20-200 Hz
- sensitivity: 87.9 dB
- top-mount depth: 7-5/8"
- sealed box volume: 1.5 cubic feet
JL Audio 10W3V3-4
Product highlights:
BUY NOW!
- 10" 4-ohm subwoofer
- mineral-filled polypropylene cone with nitrile-butylene rubber surround
- power range: 100-500 watts RMS
- peak power handling: 1,000 watts
- frequency response: 25-250 Hz
- sensitivity: 84.87 dB
- top-mount depth: 5-7/8"
- sealed box volume: 0.625 cubic feet
JL Audio 8W3V3-4
Product highlights:
BUY NOW!
- 8" 4-ohm subwoofer
- mineral-filled polypropylene cone with nitrile-butylene rubber surround
- power range: 50-250 watts RMS
- peak power handling: 500 watts
- frequency response: 28-250 Hz
- sensitivity: 83.24 dB
- top-mount depth: 4-9/16"
- sealed box volume: 0.3 cubic feet
W1 Class
JL Audio 12W1V3-4
Product highlights:
BUY NOW!
- 12" 4-ohm subwoofer
- polypropylene cone with nitrile-butylene rubber surround
- power range: 75-300 watts RMS
- peak power handling: 600 watts
- frequency response: 22-200 Hz
- sensitivity: 86.1 dB
- top-mount depth: 5-7/16"
- sealed box volume: 1.15 cubic feet
JL Audio 10W1V3-4
Product highlights:
BUY NOW!
- 10" 4-ohm subwoofer
- polypropylene cone with nitrile-butylene rubber surround
- power range: 75-300 watts RMS
- peak power handling: 600 watts
- frequency response: 25-250 Hz
- sensitivity: 84.2 dB
- top-mount depth: 4-5/8"
- sealed box volume: 0.55 cubic feet
JL Audio 8W1V3-4
Product highlights:
BUY NOW!
- 8" 4-ohm subwoofer
- mica-filled polypropylene cone with nitrile-butylene rubber surround
- power range: 50-150 watts RMS
- peak power handling: 300 watts
- frequency response: 25-250 Hz
- sensitivity: 84.8 dB
- grille not included
- top-mount depth: 3-7/8"
- sealed box volume: 0.35 cubic feet
W0 Class
JL Audio 15W0V3-4
Product highlights:
BUY NOW!
- 15" 4-ohm subwoofer
- polypropylene cone with foam surround
- power range: 150-500 watts RMS
- peak power handling: 800 watts
- frequency response: 20-200 Hz
- sensitivity: 88.2 dB
- top-mount depth: 7-1/8"
- sealed box volume: 1.875 cubic feet
- ported box volume: 2.75 cubic feet
JL Audio 12W0V3-4
Product highlights:
BUY NOW!
- 12" 4-ohm subwoofer
- Polypropylene cone with foam surround
- Power range: 75-300 watts RMS
- Peak power handling: 600 watts
- Frequency response: 22-250 Hz
- Sensitivity: 85.64 dB
- Top-mount depth: 5-7/16"
- Sealed box volume: 1.375 cubic feet
JL Audio 10W0V3-4
Product highlights:
BUY NOW!
- 10" 4-ohm subwoofer
- Polypropylene cone with foam surround
- Power range: 75-300 watts RMS
- Peak power handling: 600 watts
- Frequency response: 25-250 Hz
- sensitivity: 84.07 dB
- top-mount depth: 4-15/16"
- sealed box volume: 0.65 cubic feet
- ported box volume: 1.125 cubic feet
Thin-Line Subwoofer
JL Audio 10TW3-D4
Product highlights:
BUY NOW!
- 10" subwoofer with dual 4-ohm voice coils
- shallow-mount design with small airspace requirements
- mica-filled polypropylene cone with rubber surround
- cast alloy basket
- top-mount depth: 3-1/4"
- power range: 100-400 watts RMS
- peak power handling: 800 watts
JL Audio 13TW5v2-4
Product highlights:
BUY NOW!
- 13.5" 4-ohm subwoofer
- radical shallow-mount design with extremely small airspace requirements
- mica-filled polypropylene cone with Santoprene rubber surround
- cast alloy basket
- top-mount depth: 2-5/8"
- power range: 250-600 watts RMS
- peak power handling: 1,200 watts
MPS 300 S4
- Ultra-shallow overall depth
- 500W continuous power handling
- Optimized for extremely-compact sealed enclosure 20-24L (0.7-0.8CF)
- Air Intercooling Revolution (A.I.R.) prevents air-compression-related limitations
- Unrivalled mechanical excursion, +20% over traditional designs
- Six-layer copper voice coil (38mm/1.5 in.) ensures high thermal capacity
- Non-vented rear design allows reduced enclosure depth
- Robust screw-less mesh grille included with black screws provided
- Die-cast aluminum frame
- Solid horizontal 8AWG spring-loaded terminals
- EID: Scan, Discover, Identify
MPS 250 S4
- Ultra-shallow overall depth
- 500W continuous power handling
- Optimized for extremely-compact sealed enclosure 12-14L (0.4-0.5CF)
- Air Intercooling Revolution (A.I.R.) prevents air-compression-related limitations
- Unrivaled mechanical excursion, +20% over traditional designs
- Six-layer copper voice coil (38mm/1.5 in.) ensures high thermal capacity
- Non-vented rear design allows reduced enclosure depth
- Robust screw-less mesh grille included with black screws provided
- Die-cast aluminum frame
- Solid horizontal 8AWG spring-loaded terminals
- EID: Scan, Discover, Identify
SUB BOXES
JL Audio
CP110-W0V3
Product highlights:
BUY NOW!
- slot-ported enclosure with one 10" W0v3 subwoofer
- 5/8" medium density fiberboard construction covered with dark gray carpet
- 4-ohm impedance
- power handling: 75-300 watts RMS (600 watts peak power)
- frequency response: 25-250 Hz
- sensitivity: 84 dB
- 15-5/8"W x 14"H x 17-5/8"D1 x 13-5/8"D2
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 93264
CP112-W0V3
Product highlights:
BUY NOW!
- slot-ported enclosure with one 12" W0v3 subwoofer
- 5/8" medium density fiberboard construction covered with dark gray carpet
- 4-ohm impedance
- power handling: 75-300 watts RMS (600 watts peak power)
- frequency response: 22-250 Hz
- sensitivity: 86 dB
- 16-1/2"W x 15-3/8"H x 20-3/4"D1 x 16-5/8"D2
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 93281
CP108LG-W3V3
Product highlights:
BUY NOW!
- ported enclosure with one 8" W3v3 subwoofer
- 5/8" medium density fiberboard construction covered with black carpet
- steel-mesh grille
- 4-ohm total impedance
- power handling: 50-250 watts RMS
- frequency response: 28-250 Hz
- sensitivity: 83 dB
- 18-5/8"W x 11-3/16"H x 6-5/8"D
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 93133
CP210-W0V3
Product highlights:
BUY NOW!
- slot-ported enclosure with two 10" W0v3 subwoofers
- 5/8" medium density fiberboard construction covered with dark gray carpet
- 2-ohm impedance
- power handling: 150-600 watts RMS (1200 watts peak power)
- frequency response: 25-250 Hz
- sensitivity: 84 dB
- 29-5/8"W x 13-7/8"H x 17-1/2"D1 x 14"D2
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 93265
CP212-W0V3
Product highlights:
BUY NOW!
- slot-ported enclosure with two 12" W0v3 subwoofers
- 5/8" medium density fiberboard construction covered with dark gray carpet
- 2-ohm impedance
- power handling: 150-600 watts RMS (1200 watts peak power)
- frequency response: 22-250 Hz
- sensitivity: 86 dB
- 31-5/8"W x 15-1/4"H x 20-5/8"D1 x 16-5/8"D2
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 93283
CP208LG-W3V3
Product highlights:
- ported enclosure with two 8" W3v3 subwoofers
- 5/8" medium density fiberboard construction covered with black carpet
- steel-mesh grilles
- 2-ohm total impedance
- power handling: 200-500 watts RMS
- frequency response: 28-250 Hz
- sensitivity: 83 dB
- 36"W x 11"H x 6-1/4"D
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 93295
HO110-W6V3
Product highlights:
BUY NOW!
- ported enclosure with one 10" W6v3 subwoofer
- 5/8" medium density fiberboard construction covered with gray carpet
- 2-ohm total impedance
- power handling: 200-600 watts RMS (1,200 watts peak power)
- frequency response: 22-200 Hz
- sensitivity: 82.7 dB
- 12-1/2"W x 14"H x 21-3/4"D
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 93310
Stealthbox®
Perfect look. Perfect fit. Perfect bass.
If you're like most people, you spend more time listening to music in your car than any other place. Too bad most car stereos have weak sound quality, especially in the bass department.
Adding a subwoofer is the single, most significant improvement you can make to a car audio system. Not only do you get the benefit of the subwoofer's superior bass performance, but with proper system design, you also relieve the small front and rear speakers in your car from the burden of reproducing bass. This makes them sound better, cleaner and louder.
Rockford Fosgate
Single P1 12″ Loaded Enclosure
The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software. P1 Loaded Enclosures feature similar tonal performance as P2/P3 models, but are easier to move in-n-out of vehicles due to their lighter weight.
Dual P1 10″ Loaded Enclosure
The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software. P1 Loaded Enclosures feature similar tonal performance as P2 & P3 models, but are easier to move in-n-out of vehicles due to their lighter weight.
Dual P1 12″ Loaded Enclosure
The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software. P1 Loaded Enclosures feature similar tonal performance as P2/P3 models, but are easier to move in-n-out of vehicles due to their lighter weight.
Dual P2 12″ Loaded Enclosure
Rugged 5/8" medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. The spring terminals will accept bare wire, pin connectors, or banana plugs. This enclosure uses an advanced port design that promotes generous air movement, while reducing distortion-causing port noise, so you hear louder, deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.
Dual P3 12″ Loaded Enclosure
The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software. P3 Loaded Enclosures feature similar tonal performance as P2 & P1 models, but with higher power handling capacity.
